Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Air Spring
2. Install air spring into frame spring seat, taking care to keep solenoid air and electrical connections clean and free of damage.
3. Connect push on spring retainer clip to knob of spring cap from top side of frame spring seat.
4. Connect air line and electrical connector solenoid assembly.
5. Install heat shield to frame spring seat, if removed.
6. Align air spring piston to axle seats. Squeeze to increase pressure and push downward on piston, snapping piston to axle seat at rebound and
supported by shock absorber.
CAUTION: Air springs may be damaged if suspension is allowed to compress before spring is inflated.
7. Refill air springs. See: Air Spring Filling or Refolding/Fill