Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front
1.
Raise and support vehicle. Remove wheel assembly.
2.
Disconnect stabilizer bar link from lower control arm.
Front Suspension Assembly
3.
Remove shock absorber.
4.
Remove steering center link from pitman arm.
5.
Compress coil spring with a suitable spring compressor, tool D78P-5310-A or equivalent.
6.
Remove two lower control arm pivot bolts and disengage arm from crossmember.
7.
Remove spring from vehicle.
8.
Reverse procedure to install.
