Crown Victoria V8-4.6L SOHC VIN 6 (1996)
2.
Install the Torque Converter Leak Test Tool and Gasket (O14-R1075) into the converter hub. Figure 1.
WARNING:
ALWAYS USE PROPER SAFETY PROCEDURES WHILE USING PRESS.
CAUTION:
DO NOT DAMAGE THE CONVERTER BY APPLYING EXCESSIVE FORCE FROM THE PRESS. USE ONLY ENOUGH FORCE TO SEAL
TOOL INTO THE CONVERTER.
3.
Place the torque converter with the tool installed into press and apply enough force to seal tool into the converter. Figure 2.
