Crown Victoria V8-4.6L SOHC VIN W (2005)
Remove the 4 bolts and the fire suppression module (FSM).
-
Disconnect the electrical connectors.
-
To install, tighten to 12 Nm (9 lb-ft).
4. WARNING: The fire suppression module (FSM) orientation is critical for correct system operation. If a vehicle equipped with a fire
suppression system has been involved in a collision in which the rear floor panel area has been damaged, inspect the mounting bracket for
damage. If the mounting bracket is damaged, a new FSM must be installed whether or not the fire suppressors have deployed. In
addition, make sure the area of the FSM mounting area is restored to its original condition.
To install, reverse the removal procedure.
