Crown Victoria V8-4.6L SOHC VIN W (2005)
6. Remove the rear door glass top run front bolt.
7. Connect the window control switch electrical connectors.
8. Connect the battery.
9. Lower the rear door window glass to gain access to the rivets.
10. CAUTION: Do not attempt to forcibly remove the rivets as damage to the rear door window glass may result. Prior to removing the rivet
center pins, it is necessary to place a suitable block support between the door outer panel and the rear door window channel bracket to
stabilize the rear door window glass during rivet removal.
Remove the rivets.
11. Disconnect the battery.
12. Remove the rear door glass top run rear bolt.
