Crown Victoria V8-4.6L SOHC VIN W (2005)
Body / Frame Mount Bushing: Description and Operation
FRAME AND BODY MOUNTING
The frame is bolted to the body and is used to:
-
aid in structural support.
-
provide mounting surfaces for the rear of the front suspension control arms.
-
support the radiator.
-
provide a mounting point for the front stabilizer bar.
-
provide a mounting point for the No.2 and No.3 crossmembers.
The front No.2 crossmember is bolted to the frame and is used to:
-
aid in structural support.
-
provide mounting surfaces for the front suspension control arms.
-
provide a mounting point for the engine isolators.
The No.3 crossmember is bolted to the frame and is used to:
-
aid in structural support.
-
provide mounting surfaces for the rear transmission support insulator.
For the removal and installation of the No. 3 crossmember refer to Transmission Control Systems.