Crown Victoria V8-4.6L SOHC VIN W (2005)
Power Mirror Switch: Service and Repair
EXTERIOR MIRROR CONTROL SWITCH
Removal and Installation
1. CAUTION: Use a shop towel or similar material between the tool and the front door trim panel or damage to the front door trim panel
may occur.
Lift the front of the window regulator switch plate from the front door trim panel and position the switch plate aside.
2. Disconnect the exterior mirror control switch electrical connector.
3. Remove the exterior rear view mirror control switch.
-
Release the 2 locking tabs.
4. To install, reverse the removal procedure.
