Crown Victoria V8-4.6L SOHC VIN W (2005)
4. Inspect the rear disc brake caliper for leaks and for binding slide pins.
^
If leaks or binding slide pins are found, install a new brake caliper.
Installation
1. Make sure the stainless steel shoe slippers are correctly positioned. Install new if worn or damaged.
2. Position the anti-rattle clip on the anchor plate rail.
3. CAUTION: To prevent interference with rear disc brake caliper operation, install only the correct caliper bolt.
NOTE: When installed, the locator notch on the brake pads will be located at the upper end of the rear disc brake caliper.
Install the rear disc brake caliper.