Crown Victoria V8-4.6L SOHC VIN W (2005)
Parking Brake Control: Service and Repair
Parking Brake Control
Removal
NOTE: Column shift shown, floor shift similar.
1. With the vehicle in NEUTRAL. position it on the hoist.
2. Disconnect the battery.
3. Release the parking brake control, using the parking brake release handle.
4. Raise the vehicle on a hoist.
5. Pull the parking brake adjuster clip downward.
6. Apply the parking brake control fully.
7. Push up on the parking brake adjuster clip to lock the adjuster.
8. Release the parking brake control, using the parking brake release handle.
9. Disconnect the front parking brake cable and conduit from the cable connector.
