Crown Victoria V8-4.6L SOHC VIN W (2005)
3. Tighten the front cover bolts and stud bolts in sequence in two stages.
Stage 1: Tighten fasteners 1 through 7 to 25 Nm (18 ft. lbs.).
Stage 2: Tighten fasteners 6 through 15 to 48 Nm (35 ft. lbs.).
4. Position the belt idler pulley and install the bolts.
5. Install a new crankshaft front oil seal.
6. Loosely install the front oil pan bolts.
