Crown Victoria V8-4.6L SOHC VIN W (2005)
Headlamp Bulb: Service and Repair
HEADLAMP BULB
Removal and Installation
All vehicles
WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped.
Handle the bulb only by its base. Avoid touching the glass envelope.
NOTE:
-
The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period
of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn
the headlamps on with the bulb removed.
-
Make sure the headlamp switch and the ignition switch are turned to the OFF position.
-
Bulbs 9004 and 9007 look similar, but are not interchangeable.
1. Remove the three pin-type retainers and the radiator sight shield.
Crown Victoria
2. Remove the headlamp retainers and the headlamp assembly.
-
Disconnect the electrical connectors.
3. Grasp the headlamp bulb by its base and remove the bulb.
