Crown Victoria V8-4.6L SOHC VIN W (2005)
14. Install the trim panel.
1. Connect the rear window defrost switch electrical connector.
2. If equipped, connect the clock electrical connector.
3. Connect the PAD indicator.
4. Align the retaining clips, slide the trim panel to the left and push in, seating the retaining clips.
15. Connect the glove compartment isolator. Close the glove compartment.
16. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
Caution: There are 2 steering wheels for this vehicle, an early build and late build. These steering wheels cannot be interchanged. If installing a
new steering wheel, make sure the correct steering wheel is being installed or damage to the components can occur.
