Crown Victoria V8-4.6L SOHC VIN W (2005)
Wheel Bearing: Testing and Inspection
Wheel Bearing Inspection
1. Raise the vehicle until the tire is off the floor. Refer to Maintenance/Service and Repair.
2. NOTE: Make sure the wheel rotates freely and the brake pads are retracted sufficiently to allow movement of the tire and wheel assembly.
Grasp each front tire at the top and bottom and move the wheel inward and outward while lifting the weight of the tire off the front wheel bearing.
3. If the tire and wheel (hub) is loose on the wheel spindle or does not rotate freely, install a new wheel hub.
