Crown Victoria V8-4.6L SOHC VIN W (2005)
Body Control Module: Service and Repair
Lighting Control (LCM) Module
MODULE - LIGHTING CONTROL (LCM)
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the LH instrument panel lower insulator.
1
Remove the pin-type retainers.
2
Disconnect the courtesy lamp.
3. If equipped with adjustable pedals, remove the accelerator pedal, and shaft.
4. Position the LCM aside.
1
Remove the screws.
2
Release the locking tab.
5. Disconnect the electrical connectors and remove the LCM.
6. To install, reverse the removal procedure.
-
Check for correct operation.
