Crown Victoria V8-4.6L SOHC VIN W (2005)
Canister Purge Control Valve: Service and Repair
EVAPORATIVE EMISSION CANISTER PURGE VALVE
Removal and Installation
1. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector.
2. Disconnect the two EVAP canister purge valve vapor hose quick connect couplings.
3. Depress the EVAP canister purge valve release tab and release the valve from the bracket.
4. To install, reverse the removal procedure.
-
Leak test the system. See: Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Evaporative Emission Repair Verification
Drive Cycle
