Crown Victoria V8-4.6L SOHC VIN W (2005)
Leak Detection Valve: Service and Repair
EVAPORATIVE EMISSION CANISTER VENT SOLENOID
Removal and Installation
1. Remove the evaporative emission (EVAP) canister and bracket assembly.
2. Disconnect the EVAP canister vent solenoid inlet and outlet vent hoses.
3. Remove the EVAP canister vent solenoid.
4. To install, reverse the removal procedure.
-
Carry out the Leak Test. See: Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the Evaporative Emission Repair Verification Drive Cycle. See: Testing and Inspection/Evaporative Emission Repair Verification
Drive Cycle