ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Main Relay (Computer/Fuel System) > < Flash Electrically Erasable Programmable Read Only Memory (EEPROM)

Crown Victoria V8-4.6L SOHC VIN W (2005)

Page 1
background image

Engine Control Module: Service and Repair
Removal and Installation

POWERTRAIN CONTROL MODULE (PCM)

Removal and Installation

1. Disconnect the battery ground cable.

2. Release the clips and disconnect the three powertrain control module (PCM) electrical connectors.

3. Remove the PCM retaining bolt and remove the PCM from the mounting bracket.

-

To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.

Main Relay (Computer/Fuel System) > < Flash Electrically Erasable Programmable Read Only Memory (EEPROM)