Crown Victoria V8-4.6L SOHC VIN W (2005)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (HO2S) - Rear
HEATED OXYGEN SENSOR (HO2S) - REAR
Socket, Exhaust Gas Oxygen Sensor
Special Tool(s)
Removal and Installation
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Disconnect the heated oxygen sensor (HO2S) electrical connector.
4. Using the special tool, remove the HO2S.
5. To install, reverse the removal procedure.
-
Apply a light coat of lubricant to the threads of the HO2S.