Crown Victoria V8-4.6L SOHC VIN W (2005)
Impact Sensor: Description and Operation
IMPACT SENSORS
WARNING: Vehicle sensor orientation is critical for correct system operation. If a vehicle equipped with an air bag supplemental restraint
system (SRS) is involved in a collision, inspect the sensor mounting and bracket for deformation. Install and correctly position a new sensor or
any other damaged supplemental restraint system (SRS) components whether or not the air bag is deployed.
Vehicle With Side Air Bags
For these vehicles, the SRS employs five impact sensors. One of the sensors is integral to the RCM and is not separately serviceable. The RCM is
mounted on the center tunnel under the instrument panel. There are two front impact severity sensors located in the front-center of the vehicle, behind
the grille. In addition, there are two side impact sensors. The side impact sensors are located at the base of each B-pillar below the safety belt retractor
and pretensioner. Mounting orientation is critical for correct operation of all impact sensors.
Vehicles Without Side Air Bags
For these vehicles, the SRS employs three impact sensors. One of the sensors is integral to the RCM and is not separately serviceable. The RCM is
mounted on the center tunnel under the instrument panel. There are two front impact severity sensors located in the front-center of the vehicle, behind
the grille. Mounting orientation is critical for correct operation of all impact sensors.