Crown Victoria V8-4.6L SOHC VIN W (2005)
11. NOTE: The side impact sensor bolts must be removed in the sequence shown.
Remove the side impact sensor with bracket.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the bolt.
4
Remove the side impact sensor with bracket.
All vehicles
12. Remove the retractor and pretensioner.
1
Disconnect the electrical connector.
2
Using the special tool, remove the bolt.
3
Remove the safety belt retractor and pretensioner.
Installation
All vehicles
1. Install the safety belt retractor and pretensioner.
1
Position the safety belt retractor and pretensioner.
2
Using the special tool, install the bolt.
3
Connect the electrical connector.
Vehicles with seat side air bags
