Crown Victoria V8-4.6L SOHC VIN W (2005)
Installation
Vehicles with manual seats
1. Install the seat position sensor.
1
Position the seat position sensor.
-
Align the sensor locator clips to the seat alignment bracket.
2
Install the bolt.
3
Connect the electrical connector.
Vehicles with power seats
2. Install the seat position sensor.
1
Install the magnet assembly onto the pivot and slide forward.
2
Install the bolt.
3
Position the sensor and engage the retaining tab.
4
Install the bolt.
5
Connect the electrical connector.
All vehicles
3. Repower the system.