Crown Victoria V8-4.6L SOHC VIN W (2005)
Brake Light Switch: Service and Repair
BRAKE PEDAL POSITION (BPP) SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the pin-type retainers and the LH instrument panel insulator.
-
Disconnect the courtesy lamp.
3. Disconnect the brake pedal position (BPP) switch electrical connector.
4. Remove the BPP switch.
1
Remove the self locking pin.
2
Remove the brake master cylinder push rod spacer.
3
Remove the BPP switch from the brake master cylinder push rod.
4
Remove the brake master cylinder push rod bushing.
5. To install, reverse the removal procedure.
