Crown Victoria V8-4.6L SOHC VIN W (2005)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
ENGINE COOLANT TEMPERATURE (ECT) SENSOR
Removal and Installation
1. Drain the cooling system.
2. Remove the engine coolant temperature (ECT) sensor.
1
Disconnect the ECT electrical connector.
2
Remove the ECT.
-
To install, tighten to 25 Nm (18 lb-ft).
3. To install, reverse the removal procedure.
-
Apply sealant to the ECT sensor threads.
4. Fill and bleed the cooling system.