Crown Victoria V8-4.6L SOHC VIN W (2005)
2.
Using an inspection mirror, inspect the battery cable fusible link near the right side of the engine above the # 2 crossmember right front attaching
bolt. See Figure 1.
^
If the battery cable fusible link is not chafed or is chafed but no copper wires are showing, proceed to Battery Cable Repositioning in this
Attachment III.
^
If the battery cable fusible link is chafed to the extent that copper wire is exposed, contact the Special Service Support Center for further
instructions.
BATTERY CABLE REPOSITIONING
CAUTION:
Do not strap the fusible link to the battery cable. Be sure to only secure the battery cable as outlined.
