ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Switch-Air Suspension|Page 6115 > < Ride Height Sensor, Suspension Control|Locations|Page 6112
Page 1
background image

Ride Height Sensor: Service and Repair
Switch-Air Suspension

Switch - Air Suspension

 
Removal 

WARNING:  Before carrying out maintenance on any air suspension components, disconnect the power to the system by turning off the air
suspension switch located on the LH side of the luggage compartment to prevent vehicle damage or personal injury.
 

1. Turn the air suspension switch off.
2. Disconnect the battery ground cable.

3. Peel back the luggage compartment trim.

1

Remove the pushpins.

2

Peel back the luggage compartment trim.

4. Remove the air suspension switch.

1

From behind the quarter panel reinforcement, depress the clips.

2

Remove the air suspension switch.

5. Disconnect the electrical connector.

Installation 

1. NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive

Switch-Air Suspension|Page 6115 > < Ride Height Sensor, Suspension Control|Locations|Page 6112