Crown Victoria V8-4.6L SOHC VIN W (2005)
15. Disconnect and remove the driver air bag module.
1. Release the driver air bag module electrical wiring from the driver air bag wiring clip.
2. Squeeze the tabs and disconnect the driver air bag module electrical connector.
3. Squeeze the tabs and disconnect the driver air bag module electrical connector.
4. Disconnect the horn electrical connector.
5. Remove the driver air bag module.
16. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
17. Separate the trim panel.
-
Pull out to release the retaining clips.
-
Slide the trim panel slightly to the right, aligning the keyway.
-
Pull out, separating the trim panel from the instrument panel.
