Crown Victoria V8-4.6L SOHC VIN W (2005)
6. Connect the lateral arms to the frame and install new bolts and nuts. Do not tighten at this time.
7. Using the special tool, raise the axle until the axle is at curb height.
8. Tighten both bolts.
9. Lower the axle and remove the special tool.
10. Remove the jack stand.
11. Connect the stabilizer bar to the stabilizer bar links.
1
Rotate the stabilizer bar onto the links and install the bushings.
2
Install the nuts.
12. Install the wheel and tire assemblies.
13. Lower the vehicle.