Crown Victoria V8-4.6L SOHC VIN W (2005)
^
Inspect the date code to see if the wheel is subject for replacement per Safety Recall 03S05.
Go To Step 5.
4.
Wheels with engineering part number suffixes CF, AA or CG -
^
No date code inspection is necessary.
^
Wheels are subject for replacement per Customer Satisfaction Program 04M05 only if the vehicle is exhibiting any of the following symptoms:
1)
repeated slow air loss from a wheel/tire other than loose or damaged valve or valve stem,
2)
nibble in the steering wheel,
3)
or difficulty in balancing the wheel and tire assembly (lateral runout).
5.
Clean the wheel around the valve stem as necessary and read the build date code. See Figure 5.
NOTE:
The date code is stamped in one of two locations: either on the inboard side of the wheel near the bead, or next to the valve stem and is visible from
the outside once the full wheel cover is removed and the area around the valve stem is cleaned. If the date code cannot be read, contact your dealer
for assistance.
Wheel build date codes are shown.
