Crown Victoria V8-4.6L SOHC VIN W (2005)
b)
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or
c)
equivalent scan tool.
^
If the calibration process was successful, proceed to Authorized Modification Label Installation instructions in this Attachment III.
^
If unable to calibrate the PCM:
-
module replacement will not be covered under this program, and
-
prior to disconnecting the scan tool and closing the session, call the Special Service Support Center for further instructions.
[NEW] AUTHORIZED MODIFICATIONS LABEL INSTALLATION
1.
Obtain and prepare the Authorized Modifications Label. Describe the modification performed, and enter your P&A Code, date of repair and the
program type and program number. See Figure 1.
TRANSMISSION TESTING
NOTE 1: Check forward clutch pressure.
a)
Attach a 0-2068 kPa (0-300 psi) pressure gauge to the forward clutch pressure tap. See Figure 2.
