Crown Victoria V8-4.6L SOHC VIN W (2005)
Install the transmission fluid pan and gasket.
1
Position the transmission fluid pan and gasket in place.
2
Install the transmission fluid pan bolts.
7. Install the digital TR sensor.
1
Install the digital TR sensor.
2
Loosely install the bolts.
8. NOTE: Manual shift lever shaft must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snugly.
9. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the screws in an alternating sequence.
