Crown Victoria V8-4.6L SOHC VIN W (2005)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Maintenance/Service and Repair.
2. Disconnect the output shaft speed (OSS) or turbine shaft speed (TSS) sensor electrical connector.
3. Remove the OSS or TSS sensor bolt and the sensor.
1
Remove the OSS (4) or TSS (2) sensor bolt.
2
Remove the OSS (3) or TSS (1) sensor.
4. To install, reverse the removal procedure.