Crown Victoria V8-4.6L SOHC VIN W (2005)
3
Remove and discard the shift cable retainer.
8. From the engine compartment, use a suitable tool to push the rubber grommet through the bulkhead.
9. From the passenger compartment, remove the shift cable from the vehicle.
Installation
1. From inside the vehicle, feed the shift cable through the opening in the bulkhead and downward toward the transmission.
2. Seat the shift cable rubber grommet in the bulkhead opening.
3. Connect the shift cable to the steering column.
1
Install the new shift cable retainer.
2
Connect the shift cable to the steering column bracket.
3
Connect the shift cable to the transmission selector lever arm and support.
4. Place the gearshift lever in the (D) position.
5. Hang a 1.4-kg (3-lb.) weight on the gearshift lever.
6. From the engine compartment, clip the shift cable to the clip that routes the cable toward the bulkhead.
7. WARNING: Turn off the electrical power to the air suspension prior to hoisting, jacking, or towing an air suspension equipped vehicle.
Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these
operations. Failure to follow these instructions can result in personal injury.
Raise and support the vehicle.
8. Position the shift cable bracket and install the bolts.
