Crown Victoria V8-4.6L SOHC VIN W (2005)
Rotate the special tool several half-turns to make sure the differential pinion bearings seat correctly and position the special tool as shown.
9. Install the special tool.
1
Position the special tool.
2
Install the differential bearing caps.
3
Install the bolts.
10. CAUTION: Use only flat, clean drive pinion bearing adjustment shims.
CAUTION: Selection of too thick a shim results in a deep tooth contact at final assembly. Do not attempt to force the shim between the Gauge
Block and the Gauge Tube. A slight drag indicates correct shim selection.
Use a drive pinion bearing adjustment shim as a gauge for shim selection.
^
After determining the correct shim thickness, remove the special tools.