Crown Victoria V8-4.6L SOHC VIN W (2005)
recorded prior to disassembly is higher than the specification for used bearings, tighten the nut to the original reading as recorded.
^
Refer to torque specifications for used pinion bearings under Specifications.
8. Align the index marks.
9. CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern as shown.
Install the driveshaft.
10. Install the rear brake discs and calipers.
11. Reactivate the air suspension system by turning on the switch.
