Crown Victoria V8-4.6L SOHC VIN W (2005)
1. Position the special tool and the inner and outer drive pinion bearing cups in their respective bores.
1
After placing the inner and outer drive pinion bearing cups in their bores, place the special tool (inner) on the inner drive pinion bearing cup.
2
Place the special tool (outer) on the outer drive pinion bearing cup.
3
Install the special tool.
2. Tighten the special tool to seat the drive pinion bearing cups into their bores.
3. NOTE: If a feeler gauge can be inserted between a drive pinion bearing cup and the bottom of its bore at any point around the drive pinion
bearing cup, the drive pinion bearing cup is not correctly seated.
Make sure the drive pinion bearing cups are correctly seated in their bores.
4. NOTE: Install new drive pinion bearings without any additional lubricant since the anti-rust oil provides adequate lubricant without upsetting the
drive pinion bearing preload settings.
