Crown Victoria V8-4.6L SOHC VIN W (2005)
Axle Bearing: Service and Repair
Rear Wheel Bearing and Axle Shaft Oil Seal
Special Tool(s)
Removal
1. Remove the axle shaft.
2. NOTE: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged with foreign material.
NOTE: If only the seal needs to be replaced, use care to avoid damaging the seal bore.
Remove the oil seal from the axle tube.
^
Discard the oil seal.
3. Inspect the rear wheel bearing and axle shaft for wear or damage.
4. If necessary, using the special tools, remove the rear wheel bearing.
Installation
