Crown Victoria V8-4.6L SOHC VIN W (2005)
3. Remove the windshield side garnish mouldings.
4. Remove the instrument panel defroster opening grille.
-
If equipped, disconnect the electrical connectors.
5. Cover the defroster openings with tape to prevent contaminants from entering the defroster housing.
6. Remove the interior rear view mirror.
7. If equipped, remove the overhead console.
8. Lower the front portion of the headliner.
9. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
10. CAUTION: Care must be taken to prevent scratching the pinch weld.
NOTE: Lubricate the existing urethane adhesive with water using a spray bottle to aid the special tool while cutting.
Using the special tool, starting at the top center of the windshield glass cut the urethane adhesive from the glass and work down the sides.
