Crown Victoria V8-4.6L SOHC VIN W (2005)
Windshield Washer Pump: Service and Repair
WASHER PUMP AND RESERVOIR
Removal and Installation
1. Remove the air cleaner assembly.
2. Position the washer pump and reservoir aside.
1
Remove the bolts.
2
Position the washer pump and reservoir aside.
3. WARNING: Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of
washer solution container. Failure to follow these instructions may result in personal injury.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
Remove the washer pump and reservoir.
1
Disconnect the electrical connectors.
2
Disconnect the washer hose.
3
Remove the washer pump and reservoir.
4. Remove the washer pump.
5. CAUTION: Do not operate the windshield washer pump prior to filling the windshield reservoir.
To install, reverse the removal procedure.
