E 100 Van L6-300 4.9L VIN E 1-bbl (1982)
FIGURE 27
-
Remove the primary breather vent from the rear top of the shift housing (Figure 27) and press plug, part number 353096-S into the old breather
hole.
-
Referring to Figure 27, locate and drill a 3/8 inch diameter hole, 1-1/4 inch forward and 3/4 inch inboard of the centerline of the left rear shift
housing attaching bolt hole.
-
Press a new breather assembly, part number 01A-7034, into the new 3/8 inch diameter hole in the shift housing.