E 150 V8-4.6L (2007)
2. Remove the right-hand seat side trim.
1. Remove the screws (one located behind the seat back latch).
2. Remove the right-hand seat side trim.
3. Remove the left-hand seat side trim.
1. Remove the screws.
2. Remove the left-hand seat side trim.
4. Remove the backrest pivot bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
5. Remove the 2 recliner bolts and the backrest.
-
To install, tighten to 48 Nm (35 lb-ft).
6. To install, reverse the removal procedure.
-
Make sure the safety belts and buckles are accessible to the occupants after installation.