E 150 V8-4.6L (2007)
3. Rotate the crankshaft until the timing mark on the RH camshaft sprocket is approximately at the 11 o'clock position and the timing mark on the
LH camshaft sprocket is approximately at the 1 o'clock position.
4. Install the special tools on the camshaft.
5. CAUTION: If one or both of the tensioner mounting bolts are loosened or removed, the tensioner-sealing bead must be inspected for seal
integrity. If cracks, tears or separation from the tensioner body or permanent compression of the seal bead is observed, install a new
tensioner.
Remove the timing chain tensioning system from both timing chains.
1
Remove the bolts.
2
Remove the timing chain tensioners.
3
Remove the timing chain tensioner arms.