E 150 V8-4.6L (2007)
7. Remove junction box bracket bolts.
-
To install, tighten to 28 Nm (21 lb-ft).
8. Remove the junction box bracket bolt and position the junction box aside.
-
To install, tighten to 28 Nm (21 lb-ft).
9. Remove the engine cover.
10. NOTE: Charge air cooler (CAC) side shown, turbocharger side similar.
Loosen the CAC tube clamps.
-
To install, tighten to 12 Nm (9 lb-ft).
11. Remove the bolt and position the ground wire aside. Disconnect the electrical connector pin-type retainer.