ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2737 > < Initial Inspection and Diagnostic Overview|Page 2735
Page 38
background image

H5-H10

Normal Operation

The restraints control module (RCM), parking aid module (if equipped) and the anti-lock brake system (ABS) module (without stability control) (if
equipped) communicates with the scan tool through the ISO 9141 communications network, circuit 70 (LB/WH).

Possible Causes

-

Circuit 70 (LB/WH) open, short to ground or voltage (ISO 9141)

-

RCM

-

ABS module without roll stability control (if equipped)

-

Parking aid module (if equipped)

Test I: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not

Initial Inspection and Diagnostic Overview|Page 2737 > < Initial Inspection and Diagnostic Overview|Page 2735