E 150 V8-4.6L (2007)
Vehicles with 6.0L engine
4. Remove the 2 power steering fluid reservoir bracket-to-cowl bolts.
^
To install, tighten to 14 Nm (10 ft. lbs.)
5. Remove the 2 power steering fluid reservoir bracket-to-radiator support bolts.
^
To install, tighten to 9 Nm (80 inch lbs.)
6. Remove the 3 power steering fluid reservoir bolts and separate the bracket from the reservoir.
^
To install, tighten to 11 Nm (8 ft. lbs.)
All vehicles
7. Compress the clamp and disconnect the power steering cooler-to reservoir hose.
8. Compress the clamp and disconnect the power steering pump-to-reservoir hose.
9. Remove the power steering fluid reservoir.