E 150 V8-4.6L (2007)
7. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place and the cable end is
snapped onto the ball stud. Press the selector lever cable into the bracket and listen for the cable to click into place.
Pull back on the selector lever cable to make sure that it is locked into the bracket. Also, make sure that the selector lever cable end is correctly
installed onto the ball stud. Pull back on the selector lever cable to make sure that the cable end is correctly installed.
Lock the transmission selector lever cable lock tab.
8. Remove the 1.3 kg (3 lb) weight.
9. Carefully move the selector lever from detent to detent and compare with transmission settings. Verify that the vehicle will start in PARK or
NEUTRAL and reverse lamps illuminate in REVERSE. If not, Steps 1 through 5 must be repeated and include digital transmission range (TR) or
TR sensor adjustment in NEUTRAL. Readjust if necessary.
