E 150 V8-4.6L (2007)
9. Assemble the differential bearing cups to the differential bearings.
10. CAUTION: Mark or tag the outboard spacers indicating from which side they were removed.
Install the outboard spacers in their original positions.
11. CAUTION: Do not spread the differential housing more than specified.
CAUTION: Avoid nicking the ring gear teeth and the anti-lock speed sensor ring during assembly.
Using the special tools, spread the differential housing to the specification.
^
Use a rawhide hammer to seat the differential into the differential housing pocket.
^
Remove the special tools.
12. CAUTION: Match the mating letters as noted during disassembly.
Install the bearing caps, aligning the letters with those on the differential housing.
^
Tighten to 108 Nm (80 ft. lbs.)