E 150 V8-4.6L SOHC VIN W (2004)
11. Remove the upper front body side trim panel.
1
Remove the screw.
2
Remove the upper front trim panel.
12. Remove the lower rear body side trim panel (extended wagon).
1
Remove the screws.
2
Remove the pushpins.
3
Remove the lower rear body trim panel.
13. Remove the lower front body side trim panel.
1
Remove the screws.
2
Lift the lower front trim panel slightly upward, and remove the panel from the body side.
INSTALLATION
1. To install, reverse the removal procedure.
-
Replace any metal clips to the quarter trim panel before installing.
-
To install the upper front body side trim panel, start at the front lower corner, then work along the lower edge to the pillar.
-
To install the upper rear body side trim panel, start at the front lower portion and work up the pillars.
