E 150 V8-4.6L SOHC VIN W (2004)
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools
cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of old sealant.
Clean the valve cover mating surface of the cylinder head with silicone gasket remover and metal surface prep. Follow the directions on the
packaging.
2. Lubricate the camshaft journals with clean engine oil.
Romeo engine (4.6L)
3. Install the camshaft and the camshaft bearing caps in their original locations.
^
Lubricate the camshaft bearing caps with clean engine oil.
^
Position the camshaft bearing caps.
^
Install the bolts loosely.
4. Tighten the bolts in the sequence shown.
