E 150 V8-4.6L SOHC VIN W (2004)
12. Install the special tool and support the engine.
13. Raise and support the vehicle.
14. Drain the engine oil, and remove the oil filter.
15. NOTE: RH is shown; LH is similar.
Remove the four engine mount nuts.
16. Remove the flexplate inspection plate.
17. Lower the vehicle.
18. Using the Heavy Duty Engine Support, raise the engine 10-1/4 inches from the crankshaft pulley to the lower edge of the No. 1 crossmember.
19. Raise the vehicle.
20. Remove the bolts and partially lower the oil pan.
