E 150 V8-4.6L SOHC VIN W (2004)
-
Discard the O-ring seal.
7. CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
Disconnect the compressor manifold and tube assembly from the condenser and remove the compressor manifold and tube assembly.
-
Discard the O-ring seal.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test, and charge the refrigerant system.